Extra Essentials Bundle for Lawns & Garden - Large - Save 15%

Some helpful information….

Iron products can have an adverse reaction with our darker liquids. To avoid blockages in sprayer nozzles we recommend applying the Iron separately to other products. (Stimulizer is safe to mix with Iron). If attempting to mix together, try a jar test in the ratios you want to apply them in first. Iron should always be added last after all other products are diluted with water. 

Applied separately at various frequencies allows you to tailor nutrient input based on the soil/plant/lawns requirements and condition.

A few ways our liquids can be applied…..

Watering can: mix the amount suggested (typically 10-30ml)/9 litres of water.

Hose‐on Bottle (Seasol/weed ‘n feed etc.) or hortex sprayer: mix the minimum amount of water with the product/s to allow you to cover the required area/s. For example, for my front yard, using an old weed n feed hose-on bottle I add 100ml of each Seaweed Secrets, Activ8mate and Natures Soil Wetter, then top up with enough water to allow you to evenly cover it using the hose-on bottle (I add about 600ml water), then evenly hose-on. If using a Hortex sprayer on setting 2 without the restrictor, you shouldn’t need to add water, but if you do, just add as little amount to cover the required area.

EZFLO Fertigation System (We sell them on our site): An easy way to apply concentrated fertilisers to your lawn, plants and gardens. As easy as adding your concentrated liquid fertilisers (together if they are compatible) directly into its cannister, connect to the hose or irrigation system, adjust the setting to the dilution  rate/amount  of  fertiliser  to  be  applied  (4  settings  from  fast  to  slow  that  correspond  to  the recommended application rates on the products) and away you go. If connecting to a hose, you can hose straight on with your normal hose nozzle or even connect a sprinkler (and timer if you like) and let it do the hard work for you. Great for small lawn maintenance businesses or larger properties too as you can set and leave, then move to the next area as required, fertilising whilst you’re doing other maintenance.

Pressure/knapsack sprayer: All our products will benefit the soil and last longer when in the soil, so applying with enough water to get them into the soil is key. As they are supercharged with complex organic compounds, the leaf absorbs what it needs within minutes, so don’t need to stay on the leaf. Therefore, you need about 15 litres (a little more or less won’t hurt) of water to be applied per 100m2, so take that into consideration when applying. If you have a smaller sprayer, either do several smaller applications i.e. covering 50m at a time and repeat until the entire area is covered, or over a larger areaspray with the required amount and if you haven’t used 15 litres/100m2, give a light water-in.

Question: Should I water the lawn after applying Liquid Iron or wait 24 hours?

Answer: Liquid Iron doesn’t have to be watered in however, some do prefer to water it in, so either option is alright. Environmental factors (time of day it’s applied, wind, precipitation, time left on the leaf, soil pH, etc) can also play a part in how well it works when applied and as these often change, you may experience different results with each application.

Question: Can I mix Liquid Iron with other products?

Answer: Liquid Iron should not be mixed with other products, except for Stimulizer.  

Amount of Reviews: 1