Medium value bundle – Liquids & Granular fertiliser for Lawn and garden

Some helpful information….

Most of our liquid products can all be mixed and applied together, (The liquid iron products don’t like to be mixed as concentrates except Stimulizer, so add after the water has been added or apply separately if using a hose-on bottle and add after the water in watering can or pressure sprayer). Or they can be applied separately at various frequencies, based on the soil/plant/lawns requirements and condition.

Unfortunately, as there are a million things that effect the exact amount needed and the frequency of application for each product, there is no one fits all solution. Hence why the experts seem to always have nice looking gardens and lawns and the rest of us struggle… haha.

Regarding application, there are several ways our liquids can be applied…..

Watering can: mix the amount suggested (typically 10-30ml)/9 litres of water.

Hose‐on Bottle (Seasol/weed ‘n feed etc.) or hortex sprayer: mix the minimum amount of water with the product/s to allow you to cover the required area/s. For example, for my front yard, using an old weed n feed hose-on bottle I add 100ml of each Seaweed Secrets, Activ8mate and Natures Soil Wetter, then top up with enough water to allow you to evenly cover it using the hose-on bottle (I add about 600ml water), then evenly hose-on. If using a Hortex sprayer on setting 2 without the restrictor, you shouldn’t need to add water, but if you do, just add as little amount to cover the required area.

EZFLO Fertigation System (We sell them on our site): An easy way to apply concentrated fertilisers to your lawn, plants and gardens. As easy as adding your concentrated liquid fertilisers (together if they are compatible) directly into its cannister, connect to the hose or irrigation system, adjust the setting to the dilution  rate/amount  of  fertiliser  to  be  applied  (4  settings  from  fast  to  slow  that  correspond  to  the recommended application rates on the products) and away you go. If connecting to a hose, you can hose straight on with your normal hose nozzle or even connect a sprinkler (and timer if you like) and let it do the hard work for you. Great for small lawn maintenance businesses or larger properties too as you can set and leave, then move to the next area as required, fertilising whilst you’re doing other maintenance.

Pressure/knapsack sprayer: All our products will benefit the soil and last longer when in the soil, so applying with enough water to get them into the soil is key. As they are supercharged with complex organic compounds, the leaf absorbs what it needs within minutes, so don’t need to stay on the leaf. Therefore, you need about 15 litres (a little more or less won’t hurt) of water to be applied per 100m2, so take that into consideration when applying. If you have a smaller sprayer, either do several smaller applications i.e. covering 50m at a time and repeat until the entire area is covered, or over a larger areaspray with the required amount and if you haven’t used 15 litres/100m2, give a light water-in.

Question: What coverage do you get from the medium bundles?

Answer: The small bundles provide roughly 4,000m2 of coverage.

 

Seaweed Secrets FAQ:

Question: How soon after spraying Seaweed Secrets can I mow?

Answer: It’s best to give your lawn 8-12 hours after application before you mow. The longer you leave it, the better.

 

Question: Should I mow my lawn before or after application?

Answer: It’s best to apply after mowing.

 

Question: How often should I apply this product?

Answer: Seaweed Secrets should be applied every 2-4 weeks or weekly if required.

 

Question: How much of this product should I apply?

Answer: The standard application rate is 75-100ml for every 100m2.

 

Question: Which method of application is better for applying Seaweed Secrets? Hortex sprayer or backpack sprayer?

Answer: Either way is sufficient, it comes down to preference. If applying with a backpack or pressure sprayer, it’s best to water-in. If applying with a Hortex, there’s no need to water-in.

 

Activ8mate FAQ:

Question: How often should I apply this product?

Answer: Activ8mate should be applied every 2-4 weeks.

 

Question: How much of this product should I apply?

Answer: The standard application rate is 75-100ml for every 100m2.

 

Question: How soon after spraying Activ8mate can I mow?

Answer: It’s best to give your lawn 8-12 hours after application before you mow. The longer you leave it, the better.

 

Question: Should I mow my lawn before or after application?

Answer: It’s best to apply after mowing.

 

Question: What ingredients does this product contain?

Answer: Activ8mate contains a unique blend of nutrients, blood and bone, seaweed, fish, PSG (Peruvian Seabird Guano), humic and fulvic acid and triacontanol.

 

Nature's Soil Wetter FAQ:

 

Question: What’s the best way to apply Nature’s Soil Wetter?

Answer: Nature’s Soil Wetter works best when in the ground so if applying with a pressure sprayer, you should water-in after application. Otherwise, apply with a hose-on bottle.

 

Question: How often should I apply this product?

Answer: Nature’s Soil Wetter should be applied once every month, but more often if you’re trying to adjust the soil structure.  

 

Question: How much of this product should I apply?

Answer: The standard application rate is 100ml for every 100m2. If treating once every season, use 300ml.

 

Question: How soon after spraying Nature’s Soil Wetter can I mow?

Answer: It’s best to give your lawn 8-12 hours after application before you mow. The longer you leave it, the better.

 

Question: Should I mow my lawn before or after application?

Answer: It’s best to apply after mowing.

Be The First To Review This Product!

Help other Plant Doctor Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review