EZFLO Mainline 3.2L [Adapter: PLEASE PICK ADAPTER SIZE]

The EZ-FLO1 is the affordable mainline equivalent of our best-selling hose/tap connected system. The FLO1 is ideal for small gardens, lawns, seed raising, drip systems, greenhouses, vertical gardens and more.

Type: Affordable mainline system, ready to attach to your irrigation system, mains, tank or bore
Additive capacity: 3.2 litres/ 3.2 kg water-soluble, approximate
Litres of treated water per refill: 1280 on fast setting to 48.000 on slow setting, two ratios in between
Operating pressure: minimum 5 psi (35 kPa) to maximum 80 psi (550 kPa)
Irrigation mains flow rates: Minimum 2 litres per minute (lpm) to 300 litres per second (l/s) plus, depending on CBV size selected

Dimensions:  30cm Height x 18 cm Diameter
Parts included in kit: tank; proportioning cap; 1.5 meters each of clear and black tube; heavy-duty shut-off valves and liquid adaptor, note essential accessory below
Additional Features: Ability to use most liquids or water-soluble concentrates.

Required accessories: A ball valve coupling adapter (CBV) to suit your irrigation mains size. Choose from either

¾” – 20mm adapter

1” – 25mm adapter

Check out The Aussie Lawn's installation guide LINK

An easy way to apply concentrated fertilisers to your lawn, plants and gardens.

As easy as adding your concentrated liquid fertilisers (together if they are compatible) directly into its cannister, connect to the hose or irrigation system, adjust the setting to the dilution rate/amount of fertiliser to be applied (4 settings from fast to slow that correspond to the recommended application rates on the products) and away you go.

If connecting to a hose, you can hose straight on with your normal hose nozzle or even connect a sprinkler (and timer if you like) and let it do he hard work for you.

Great for small lawn maintenance businesses or larger properties too as you can set and leave, then move to the next area as required, fertilising whilst you’re doing other maintenance.

EZ-FLO is the fastest and easiest way to have healthy plants, turf and crops. Comes in a range of sizes to suit a broad range of applications, from residential gardens to commercial golf courses and small crops.

Dispenses a precise amount of concentrated fertiliser every time you water. No matter how small or large your property is you can take advantage of EZ-FLO products to save money, conserve valuable resources, and fertilise more efficiently and quickly.

Getting Started

Start by selecting a water soluble or liquid fertiliser. With EZ-FLO you do not need to pre-mix or dilute your fertiliser ever again. Fill your EZ-FLO tank with your concentrated fertiliser, top up fully with water and select the setting (ratio) on the cap and get ready for automatic fertigation.

Hose and drip models have injection settings of 1:100 (fast), 1:250, 1:400 or 1:1000 (slow).

Main-line models installed into irrigation lines have injection settings of 1:400 (fast), 1:2000, 1:8000 or 1:15000 (slow).

You can use EZ-FLO for microdosing – where small amounts of fertiliser are applied every time you water – by selecting the ‘slow’ setting. At 1:1.000 one litre of concentrate is displaced for every thousand litres of water if using the hose and drip system and 1:15.000 if using the main-line systems.

Microdosing is beneficial as plants can absorb nutrients immediately. This creates a robust root system, generating healthier plants with less water, and it also reduces fertiliser run-off.

How it works

EZ-FLO requires either a hose tap adapter for residential systems or for permanent irrigation a main inline adapter (CBV). These provide a slight pressure drop allowing a small stream of water from the hose or irrigation pipe to enter the EZ-FLO, displace the fertiliser concentrate, then re-introduce it back into the main water stream where it is diluted.

As water enters the tank separation is achieved – heavier concentrate on the bottom and lighter water on the top. EZ-FLO only pulls concentrate from the bottom of the tank; it does not dilute the concentrate.

The result is consistent levels of fertiliser throughout the whole cycle until the fertiliser is depleted and is replaced with water.

EZ-FLO has no moving parts, requires zero maintenance and zero power.

The ease-of-use sets EZ-FLO apart from competing fertigation technologies