Micronised Gypsum Liquid - 10L

Micronised Gypsum - premium liquid clay buster

The introduction of the “clay buster” in liquid form allows ease of application and more precision in placement.

A high-analysis source of micronised natural gypsum combined in a free-flowing suspension. The soil conditioning capacity of gypsum is dramatically magnified with the huge increase in surface area associated with micronisation.

Benefits:

• More convenient and easier to apply than conventional gypsum.
• A “fast food” source of calcium and sulfur.
• 25 L is equivalent to 1 tonne of gypsum (in terms of immediately available calcium).
• The tiny particle size ensures improved coverage and amplifies the soil conditioning and clay-busting capacity of gypsum.
• A sulfur-based protein builder for cereal crops and pasture.
• Ideal for growers seeking a natural source of calcium and sulfur.
• An efficient midseason supplement for sulfur-hungry crops like canola and root crops.
• A “spoon-feeding” option for light, sandy soils with poor retention of both calcium and sulfur.
• Useful in the management of high magnesium and sodium in the root zone.

PLEASE NOTE:

We have found this gypsum has the potential to attract anaerobic microbes which may make the liquid smelly and turn black if not kept air-tight (sealed) immediately after use and stored in a cool location. It is still safe to use after this, however may not be at its best. For larger orders please contact us

APPLICATION RATES

Soil Ameliorant or Fertigation:

10 – 50 L/ha as required. Use higher rate for soil amelioration

Home Garden Application:

Dilute 45 mL per 9 L watering can and apply the diluted mix at a rate of 1 litre per square metre – this

diluted mix can also be poured over foliage. Repeat every 2 – 4 weeks or as required

Foliar Spray (please note, whilst this is a micronised product we recommend drenching with a watering can or put through systems that can take larger particle sizes:

Vegetables

1 L per 100 L water up to 5 L/ha equivalent. Apply weekly or as required

Orchards & Vineyards

1 L per 100 L water up to 7 L/ha equivalent. Apply every 2 – 4 weeks or as required

Ornamentals & Turf

1 L per 100 L water up to 5 L/ha equivalent. Apply every 2 – 4 weeks or as required

Broadacre Crops

1 – 3 L/ha in 60 – 100 L water, depending on canopy closure. Apply as required

Pasture

1 – 3 L/ha in 60 – 100 L water, apply as required

Spot-Spraying

50 mL per 10 L water, apply as required

Liquid Inject:

2 – 5 L/ha

Use a minimum dilution rate of 1-part product to 3-parts water. Rate will depend on crop, row spacing &

soil type. Always consider N & P crop requirements for starters based on reliable soil test data.

TYPICAL ANALYSIS W/V

Calcium (Ca) 16.5%

Sulfur (S) 13.0%

SG 1.42

pH 6.9

Appearance Thick, off-white/cream colour liquid

INSTRUCTIONS

Shake or stir well before use & maintain constant agitation.

It is advisable to pre-mix, adding this product slowly while maintaining agitation in spray tank to

prevent settling of solids. Will pass through 200-micron filter under ideal conditions, however, a coarse inline filter (500 microns/35 mesh) is recommended to ensure the delivery lines are free from particle contaminants from other sources. Where higher water rates are required for good foliar coverage, do not exceed maximum product rate per hectare. MMS products will leave a visible residue on leaves and fruit when used as a foliar. Avoid spraying close to harvest if produce

is susceptible to staining. Sensitive foliage or plants should be test sprayed prior to full scale application. Frequencies are a guideline only and can be adjusted according to farm practices and/or in conjunction with crop monitoring. Ensure suitable spray conditions (e.g. temperature, humidity, wind-speed), prior to foliar application. Compatibility and/or performance cannot be guaranteed when combined with other products. Jar test for compatibility and spray test on small area before

wide-spread use.

STORAGE & HANDLING

Store in a cool dry area out of direct sunlight. This product has been tested to store safely down to 5ºC. Sedimentation may occur below 5ºC. Do not pre-mix or store in diluted form. MMS products are very heavy and every care should be taken when handling these materials to avoid back injury.